- LCD screen and easy to set dmx address.
- Spraying height can reach 8-10 meters.
- 6 Meters Hose length with quick connector.
- Spray the mist continuously until you stop operating it.
- Input and output connector, easy to connect the machine power cable one by one.
- Product Specification:
Output: high output of carbon dioxide gas
Control Mode: dmx512 control and manual control
Dmx channels: 1 co2 spray channel (0-255) in
Linkable: Dmx/power in/out (lockable power)
Range: 8-10 meter
Pressure rating: up to 1400psi
Hose length: 6 meters with quick connector
Product Warranty Time: 1 year
Packing way: Carton box with foam inside
Packing size: 31cm*cm*25 30cm
Gross weight: 7kg
- Packing Included Each Unit :
1pcs Co2 jetting machine
6-meter gas hose
2-meter DMX cable
- Please Note :
Shipping does not include confetti paper, if you need it, please contact us before ordering.
That we have different power supply plugs, united kingdom plugs, au plugs, EU plugs, the USA plugs, please let us know the power supply you need, or we will choose everything according to your country.
How To Use
- Install Illustration:
1. Place the large co2 column in the corresponding position.
2. Connect the c02 hose to the gas bottle.
3. Place the bottle and keep it flat.
4. Connect the machine with the gas bottle through the hose, the hose on one side connects to the tank, the other side connects to the machine.
5. Connect the valve of the gas bottle.
6. Connect the machine and the console.
7. Before disassembling, firstly turn off the bottle valve, let out the gas remaining in the tube, then turn off the power, finally separate the gas bottle connector.
- Attention: Please follow the manual to operate the machine.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- Q: Which scenarios are more commonly used by this product?
A: The air column machine is generally used for stage performances, bars, and music festivals. It mainly depends on what your customers do. We can recommend suitable products for you.
- Q: What are the configurations of the gas column machine?
A: The standard product is a 6-meter high-pressure resin tube, a 2-meter signal cable, a 1.5-meter power cable, and an instruction manual for the product (the number of air pipes is based on the number of connectors on the machine).
- Q: How long can an air column machine generally spray and can it continue to spray?
A: The gas column machine can not continue jetting. If the jetting time is too long and the air pressure is too high, the valve may be damaged. In order to ensure that the machine parts have a normal service life, we recommend that each jet be controlled at About 10 seconds, it takes five seconds in the middle to blow again. This way, you can avoid damage to the accessories due to improper operation.
- Q: How many machines can a bottle of gas be connected to?
A: We generally use 40L gas cylinders. In order to achieve the best results, we recommend one gas cylinder to connect one machine. If the space for the gas cylinders is not sufficient or other problems cannot be satisfied for one gas cylinder, It is possible to share two cylinders with one machine, The trachea needs a three-way link to achieve one for two, so let us know your requirements so as not to mismatch the pipes and make them unusable when you receive the machine.
- Q: Can the air column be used without being fixed?
A: Normally, it must be fixed for use, because the impact force of the gas column machine is large. If it is not fixed, the product will move at that time, which will affect your use.
- Q: How long is your product warranty? If there is a quality problem, you will be responsible for shipping?
A: The air column machine warranty is one year. Two of the accessories have the following conditions. The warranty will be different. The first is the connector. The connector is consumable. If the customer will not use it, force the two connectors. It is very easy to damage the joint if it is docked. The second is the valve because the spool hole in the valve is very very small, even if there are very small iron pieces or impurities in the gas, it will cause the plug of the spool. This situation belongs to gas reasons, so if the warranty needs to be replaced, this cost must be paid by the user. I also hope that you explain the situation during the communication with the customer.
- Q: What control methods are there?
A: There are three control methods for this column machine. The first is DMX console control, the second is electronic control, and the other is button control. You can choose a better control method according to your site.
- Q: How many channels does this product have?
A: This gas column has only one channel to control the injection switch, and the operation is relatively simple.
- Q: Do I need to set the address code in advance to connect to the console?
A: Yes, the connection console can set the address code in advance, and control the injection of the gas column machine according to the corresponding channel.
- Q: Can I adjust the angle?
A: This air column has no adjustment function. If you want to be able to adjust the angle, we also have many air column machines that can adjust the angle. I can send it to you.
- Q: How high can this machine spray?
A: Yes, the spray height of the machine is affected by the pressure of the cylinder. Normally, it can spray 8-10 meters.
- Q: Is there certification?
A: Yes, all of our products are CE FCC ROSH certified and can be exported.
- Opens in a new window.