- Confetti blasts over 10m (30 ft) and streamers soar over 20m (60 ft).
- Remote control mode, the control distance is about 10 meters (30 feet).
- Equipped with a 10A fuse to prevent the unit from being damaged by short circuit.
- Suitable for the market of 40cm, 60cm, 80cm various sizes of electric confetti tube.
- Adjustable barrel,The electronic confetti shoot machine’s angle has an easy to adjust feature.
- Product parameters:
Voltage: 220v/50hz (or 110v/60hz).
Packing size: 28.5*17*24.5cm
Control Mode: dmx 512 and remote control
- DMX channel: 4 channels
Channel 1 : al shot
Channel 2: shot from left to right
Channel 3: shot from right to left
Channel 4: shot from the middle apart
Output: confetti cannons 40cm : 5m
Confetti cannons 80cm: 12m
Streamer cannons 40cm : 12m
Streamer cannons 80cm : 20m
- Package included/each unit:
Single-head confetti machine
We cannot ship the confetti cannon shoter together with the confetti machine. Due to the shipping company's policy, the confetti cannon belongs to the dangerous goods series, so you need to buy it at your local market.
How To Use
1. Open the packing box, counting the accessories accompanied, read the manual carefully.
2. The machine works with electric confetti cannon (need purchase separately).
3. Please check all parts of the machine are intact before first use.
4. Check the electric power and socket are compliance with requirements.
1. Please put the machine in its proper place.
2. Adjust the angle of the machine via Angle adjustable knob as you want.
3. Connect the machines and dmx controller with dmx cables.
4. Plug in power cable into power socket.
5. The machine is controlled by dmx512, it have 4 channels
6. First set the dmx address of the machine, turn on the power of dmx controller, the green led light in the dmx dips will be on-if the machine power is on also.
7. Turn on the machine power, the Power Indicator will be on then.
8. Output dmx signal to the machines, let the machine in ready status.
9. Put the electric confetti cannon in the holder and screw up it.
10.If all ready, you could use the controller to control the machine to shot the electric confetti cannon then.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
- Q: Can the machine spray ribbons except spray confetti paper?
A: Yes, the machine can spray confetti carridge filled with confetti paper ribbons.
- Q: How high can the machine spray?
A: It can spray 6-12 meters
- Q: Do you sell confetti carridge?
A: As confetti carridge is defined as flammable and explosive products, we cannot send you. You can buy it locally.
- Q: Where can I buy confetti carridge?
A: You can buy it on Amazon, Taobao or locally, it's easy to buy.
- Q: What is the adjustable angle of the machine?
A: MK-CN07, MK-CN03: 180 degrees adjustable
MK-CN07A, MK-CN03A: 360-degree adjustable battery
MK-CN04: 180 degrees front and rear adjustable; 180 degrees left and right
- Q: What are the advantages of using a machine to open confetti carridge than to open them directly by hand? Wouldn't it be easier to open directly with your hands?
A: For small parties and other events, it may be more convenient to open confetti carridge directly with your hands. However, if your field is relatively large, you can also save manpower, and you can control the number of launches at any time when you launch more than one. Especially in some large-scale performances, the height that can be sprayed with confetti paper or ribbon by our machine will be higher, to achieve better results.
- Q: Does confetti carridge have different size? How about the spray height?
A: Yes, confetti carridge come in different sizes. There are 40.60.80cm.
40cm: spray 5-8 meters
60cm: spary 8-10 meters
80cm: spray 10-12 meters
40cm Ribbon carridge: spray 5-8 meters
80cm Ribbon carridge: spray 10-12 meters
- Q: Can you engrave my logo? What’s the MOQ?
A: Yes, we can engrave your logo.
Free engrave for 6 and above, below 6pcs, you need to pay extra.
- Q: Received the machine just now, but Power Indicator is not On, what is the problem?
A: May Power cable is not connected, pls check if the power cable is connected or change one new power cable.
You may bought bad quality confetti carridge, please change a batch of confetti carridge.
- Q: How many channels of the machine?
A: MK-CN07, MK-CN07A only has 1 channel, it will spray after you connect DMX.
But there are 4 channels when mutiple in series:
Channel 1: Spray Together (mutiple in series)
Channel 2: From Left to Right(mutiple in series)
Channel 3: From Right to Left(mutiple in series)
Channel 4: From the middle to both sides(mutiple in series)
MK-CN03, MK-CN03A has 6 channels:
Channel 1: spray the first one
Channel 2: spray the second one
Channel 3: spray all
Channel 4: spray from left to right
Channel 5: spray from right to left
Channel 6: spray from middle to both side(series connection)
MK-CN04 has 6 channels ：
Channel 1: spray the first one
Channel 2: spray the second one
Channel 3: spray the third one
Channel 4: spray the fourth one
Channel 5: spray the second,third,fourth one
Channel 6: spray from left to right
- Q: Can I reuse the confetti cannon ?
A: No. They only can be use for one time.
- Q: Why the confetti carridge are not sprayed?
A: You may bought bad quality confetti carridge, please change a batch of confetti carridge.
- Q: How long is your warranty? How about after sale service?
A: We promise one year warranty. If there is any quality problem, we offer accessories for free. Charges for repairs for parts over one year.
- Q: Why the motherboard is burned?
A: Poor quality fireworks can easily touch the line itself, and it will short circuit not need high current.
Besides, it also will cause burning the resistance of machine and socket.
- Q: How often does the machine's fuse burn?
A: The fuse is burned may caused by unstable voltage. So the machine is not working.
- Q: Is there any requirement for confetti carridge?
A: You’d better buy good quality confetti carridge. And select the length according to your needed.
- Q: What’s the difference of buying two piece confetti launcher and one piece double barrel confetti launcher?
A: First of all, the price of 2 pieces signal head confetti machines is almost double head that of one piece two heads confetti machine. But they got same effect.
Secondly, if you want to control one piece popper, one piece double heads confetti machine can make it.But the for one head confetti machine, you need to connect them in series.
- Q: Is there a delay in remote control?
A: There is a little bit delay.
- Q: Received the machine just now, Power is On, what is the problem?
A: Please check if the DMX cable is good, if so. Please check dmx address was wrong setting?
- Q: If I have two confetti machines connected in series, how to make them spray separately?
A: You just need to set DMX address. The first machine is set d001 and the second one is set d002. In this situation, channels of first machine is channel 1 to channel 6, channels of the second machine is 7 to 12.
- Q: The machine can’t be control by a remote controller, what’s the reason?
A: (1)Please check if the remote controller has power.
(2)Please check if remote mode is opened.
(3)If it is opened.
a.Your remote may broken. Please change a remote to test it again.(Press the enter bottom on machine---System settings---Wireless You’ll see if the remote mode is opened, if it is closed, open it.)
b.The resistance may be burned. We need to open the machine for a check. (see the photo, the part circled in red are resistance)
(4)If the wireless mode is closed.
Please press the first remote switch button towards the back of the machine. Four indicators will turn on one by one. When you press the second bottom, the middle two indicator will light up.
Press the bottom“-”indicators off one by one. Press ”+”bottom, all indicators light up once.
At that time you can control the machine by a remote.
- Q: How to set English?
A: Press the fourth bottom enter”display setting”, when you see”1. Language”, select English.
- Abre en una nueva ventana.