Description
Description
- DMX512/Manual/Remote control three control modes, easy to operate.
- Small machine, big smoke; covers 120 cubic meters in 60 seconds.
- This machine features a silent centrifugal fan.
- The oil pot is designed with LED lighting for easier observation of oil consumption. The front-facing spray button is designed for quick and convenient operation.
Technical Specifications
- Features：
1.Built-in centrifugal fan - powerful airflow, faster smoke output.
2.1-liter tank, sustainable use for approximately 6 hours, long-lasting output, lower cost, enough to last the entire party night.
3.Unique dual-side heat dissipation structure - rapid heat dissipation, cooling product temperature when the fogger power is on.
4.LCD panel operation, easy to operate and adjust smoke volume.
5.Knob design for easy carrying and hanging in the air.
6.Liquid level indicator, easy to view liquid volume inside the tank.
7.Oil-free protection system, the machine power will automatically shut off when the fog fuel is depleted.
- Specifications：
Voltage: AC110V/220V, 50Hz/60Hz
Power: 900W
Fuse: 10A
Preheating time: Approximately 3 minutes
Fuel consumption: 1 liter per 1 hour 30 minutes
Tank capacity: 1 liter
Control: Wireless remote control, 4 buttons, 60 meters range
Coverage area: Covers 120 cubic meters in 60 seconds.
Consumables: Fog fluid
Machine size: 235/210/240mm
Packaging size: 28.5/25/29CM
Net weight: 4.28KG
Gross weight: 4.8KG
How to Use
- Operating Steps：
- Main Menu Function Selection：
Up: Modify parameter value
Down: Modify parameter value
Timer: Scheduled start/stop
Volume: Output start/stop
Manual: Wind speed setting
- Usage precautions:
1. Clean the oil passage once a month to prevent blockage of the oil passage heating rod.
2. Use original thin mist oil.
3. Voltage must not exceed 240V or 120V.
- Usage precautions:
The fog machine is operating with fog fluid. However, fog fluid is prohibited for maritime shipping. It can be obtained domestically in your own country.
- DMX512通道表：
2 CHANNEL
Smoke spray channel
Fan adjustment
Shipping
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
Q&A
- Q: How long is the heating time? How long can I use it after filling up liquid？
A: MK-F11：With only 30 seconds heat-up time. The 2L fluid tank allows for 4 Hours of continuous production at 100% without refilling.
MK-F11A： With only 80 seconds heat-up time. The 1L fluid tank allows for 6 Hours of continuous production at 100% without refilling.
- Q: The liquid is oil-based? What kind of liquid it can use? How can I get it?
A: Not, It’s water-based and doesn’t cause oil stains. It uses pro-morning haze liquid. You can buy it locally. We also have to sell liquids, but liquids are dangerous and can only be shipped by sea. The minimum order is 200 bottles. Ordinary haze liquid can also be used, but the effect is different.
- Q: Can you adjust the spray angle?
A: MK-F11： The haze outlet is magnetic, so you can adjust the spray angle to 180 degrees.
MK-F11A： The haze outlet is magnetic, so you can adjust the spray angle at 60 degrees."
- Q: What is the difference between MK-F20 and MK-F11? Which one is better?
A: The pro-morning fog machine and mist haze machine can be used indoors and outdoors. Pro morning haze machine is designed for a life on the road with a sturdy flight case, powerful heater core, and advanced options, and it can be superimposed on the machine to save floor space. Create more effects.
MK-F11 Mist haze machines are small and it usually fixed in one place. Which one is better depends on what type of event you want to use the machine. The machine can contain 2L fog liquid which lasts to use 2 hours.
- Q: If run out of liquid, It’ll stop heating work?
A: Yes. It has double temperature control protection, when the oil is used up, the machine will automatically stop working to protect the machine, and there is a temperature control device, when the temperature reaches 230 degrees, the machine will automatically stop working to avoid unnecessary losses
- Q: The haze output can be timed and quantified?
A: It has an easy-to-read LED function display with a built-in timer, complete fog output, fan speed control via Timer button, continuous, intermittent, or manually-triggered hazing. Allows for the perfect speed of output and thickness of fog effects for any application.
- Q: It can use at the club and outdoor?
A: It can be used indoors and outdoors. It is definitely the best choice for those stage designers, performers, audiences, concerts, theatres, etc.
- Q: How to use it?
A: MK-F11: 1. First, open the oil lid, add at most 2 liters of morning fog oil.
2. Plug the power cord into a power socket.
3. If you use the remote control, please connect the remote control receiver, turn on the power switch, the machine automatically heat about 30 seconds the display shows HAZE READY, you can use the machine, UP and DOWN button to adjust the size of smoke, can be adjusted according to demand Value value. Remote control button A turns off the machine and remote control button B turns on.
4. If using the DMX512 control mode, when the machine warm-up successfully, the display shows HAZE READY, channel 1 to adjust the fan size, channel 2 control smoke.
5. If using the timing quantitative control mode, after the machine heating is completed, adjust the size of the smoke as required, and smoke out time and smoke out time.
MK-F11A: 1. First, open the oil lid, add at most 1 liter of morning fog oil.
2. Plug the power cord into a power socket.
3. If you use the remote control, please connect the remote control receiver, turn on the power switch, the machine automatically heat about 80 seconds the display shows HAZE READY, you can use the machine, UP and DOWN button to adjust the size of smoke, can be adjusted according to demand Value value. Remote control button A turns off the machine and remote control button B turns on.
4. If using the DMX512 control mode, when the machine warm-up successfully, the display shows HAZE READY, channel 1 to adjust the fan size, channel 2 control smoke.
5. If using the timing quantitative control mode, after the machine heating is completed, adjust the size of the smoke as required, and smoke out time and smoke out time.
- Q: Is the timed quantification set every time it is turned on or is it automatically saved?
A: It’ll not be saved automatically and needs to be set after using the machine.
- Q: Why the air pump is so noisy?
A: Maybe there is fog liquid in the air pump which caused excessive vibration. Need to replace the air pump.
- Q: The fog comes out with fog liquid, why?
A： It may be that the air pump is faulty and needs to be replaced.
When the machine sprays, the fog is not sufficient.
In this case, the centrifugal fan of the fog machine may be defective and needs to be replaced.
- Q：Why is the machine not working?
A： Please check if the heater and pump are working. If they are working, it may be due to a malfunction in the LCD screen or motherboard. Please take a video and send it to us. If it's a display issue, replace the display. If it's a motherboard issue, replace the motherboard.
- Q：What is the difference between water-based and oil-based fluids?
A： Oil-based fluids may cause oil stains indoors if used for an extended period, and they can contaminate light if exposed. However, they do not require heating and can be used as soon as the machine is turned on. As for water-based fluids, you don't need to worry about these issues. They can be used indoors and outdoors but require heating.
- Q：Where can the fluid be placed? What should I do with unused fluid?
A： Unscrew the fog outlet cap and pour in the oil-based fluid. For unused fluid, you can pour it into additional bottles.
You may also like
Recently viewed
- Opens in a new window.