- Spray Height can reach to 4-5m.
- Continuous output time up to 20s-30s.
- Fireworks can adjust the angle 360 degrees.
- DMX512 / Remote Control mode，easy to use.
- 12x3W RGB 3 in 1 high brightness led gives a more pleasing and colorful visual effect once combined with the confetti.
Voltage: AC 220 V / 50 Hz 110 V available
Power: 1500 W
Control mode: DMX/Remote control
DMX Channel: 6 channel (DMX mode)
Size: 57x33x33 cm
Weight: 8 KG(17.6lb)
Loading of confetti:0.3-0.5kgs
Spray height: 5-6m
- DMX 6 channels instruction:
Channel 1: Fan on
Channel 2: LED Auto
Channel 3: LED in Blue
Channel 4: LED in Green
Channel 5: LED in RED
Channel 6: LED Strobe
- Packing list for each unit:
1pcs confitti machine
1pcs DMX cable
1pcs Power Cable
1pcs Remote Controller
How To Use
- INSTRUCTIONS :
1. Place the large CO2 Column on the corresponding position,adjust the shot angle you needed.
2. Connect the power and DMX. You can also connect multiple units.
3. Set DMX mode on the bottom of the machine
4. Keep the vents clean and open. Please don't block it.
5. Press the bottom ON. Push fader on the console. The machine will work.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
- Q: What’s the warranty time?
A: We promise 1 year warranty.Q: How height can the machine spray?
- Q: How height can the machine spray?
A: MK-CN06 can spray 4-5 meters. MK-CN06A can spray 5-6 meters.
- Q: Does the machine need co2 to work?
A: This two confetti blower no need co2 to work.
- Q: How many watts of every singal LED?
A: There are 12pcs 3W LED, RGB 3in1
- Q: How many kilo confetti paper can the machine contain? How long can it spray? What’s the coverage?
A: MK-CN06 and MK-CN06A can contain 0.3-0.5kg confetti paper each time.
MK-CN06 can spray 20-25 seconds.
MK-CN06A can spray 25-30 seconds
Both of them can cover about 50 square meters(540ft)
- Q: What’s the adjustable angle of the machine?
A: 180 degrees adjustable.
- Q: What’s the difference between MK-CN06A and MK-CN06?
A: MK-CN06A sprayed more uniform.
Spray time is slightly longer than MK-CN06.
Coverage is lager than MK-CN06.
- Q: What is the controllable range of the remote control?
A: 20 meters controllable.
- Q: Do I need to make the machine stop to work to add confetti paper after each spray of confetti paper?
- Q: What kinds of confetti paper do you use？
A: The machine work with common confetti paper.
The size of confetti paper is preferably 2 * 2cm.
Using small confetti can get better effect.
- Q: LED didn’t light up, but the machine was working, what’s the reason?
A: (1)May be lamp bead desoldering. We just need to reconnect the desoldered position.
(2)It may aluminum plate problem. In this situation, we need to change a new aluminum plate.
- Q: Can the machine spray ribbons?
- Q: The machine doesn’t work, what’s the reason?
A: Please send videos. The main board or fuse may broken. Within the warranty,we’ll send you the replacement if it is needed.
- Q: Do your product have certificates?
A: Yes, our products have passed CE, Rohs and FCC.
- Wird in einem neuen Fenster geöffnet