MOKA SFX H-E03A LGP Triple Head Flame Machine

Description

• Triple Head LPG Fire Machine for Stage Effects
  Designed for concerts, festivals, DJ shows and live performances.
  
• Up to 2m Real Flame Height
  Creates powerful LPG real flame effects up to 2 meters high for high-impact stage performances.
• 6-Channel DMX Control
  Supports DMX512 for flexible professional operation.
• Multi-Effect Flame Output
  Supports single-head output, three-head simultaneous output, and left-to-right or right-to-left flame chase effects.
• Safety Channel Protection
  Built with a safety channel to help prevent accidental flame output caused by mistaken DMX operation.
• Tip-Over & Shock Auto Shutoff Protection
  Automatically stops flame output when the machine tilts, falls, or is exposed to shocks, helping improve event safety.
• Uses LPG Gas Tank
  Connects to an LPG gas tank for stable real flame output, suitable for professional stage fire machine applications.

Please Note ：

All machines sold do not come with a DMX controller. If you need one, please purchase separately: Mini Battery DMX Controller 24 Channel Battery Controller

Technical Specifications

• Specifications ：

Package List：

• Please Note:

Fire oil is not included. Due to shipping restrictions, flammable liquids cannot be shipped with the machine. Please purchase suitable fire oil locally and follow local safety regulations.

How to Use

Usage Steps:

1. Securely connect the LPG gas tank to the flame machine with the gas hose.
2. Connect the flame machine to the power supply and turn on the power switch. Connect the DMX signal cable to the machine and DMX controller, then set the DMX address. The machine will perform a DMX self-check, and the indicator light will flash. When the DMX signal cable is connected properly, the display will light up.
3. The flame machine is equipped with a safety channel. The machine can only work when Channel 1 is set between 100 and 155. Activate the safety channel, then use Channels 2-6 to control different flame effects.
4. After use, set the DMX address to safety mode, then turn off the LPG gas tank first.
5. Spray out the remaining gas inside the hose before disconnecting the gas pipe.
6. Turn off the flame machine, disconnect the power cord and DMX signal cable, then wipe the machine clean after it has cooled down.

Attention:

Please read the operating guide carefully before using this product.

If the wind at the site is too strong during operation, the flame height may be affected. This is normal.

Q&A

• Q: If I use this flamethrower, will it cause a fire, or cause the smoke alarm to go off?

           A: Our flame machine can be used indoors or outdoors, as long as it is kept at a relatively safe distance, it will not cause a fire or cause the smoke alarm to go off. And our machine is equipped with a safety channel, when the machine is tilted more than 45 degrees, the flamethrower will immediately stop working to improve the safety of use.

• Q: Do I need to get a security clearance to use your flame machine or spark machine?

           A: Our flame and spark machines are widely used by customers in Europe, the United States, and other markets. However, permit or licensing requirements may vary by country, region, and venue. Please confirm the local requirements with the relevant authority before use.

• Q: What should I do if the machine keeps working?

           A: First of all, please confirm that all procedures with normal operation. It is recommended to cut off the power and operate it again, if fails again, the cause may be the valve is broken. Please cut off the power, and replace a new valve.

• Q: What should I do if the machine just sprays oil and doesn’t catch fire?

           A: In this case, the angle of the ignition pin may be distorted, and the spray nozzle may not be aligned so that the spark cannot be ignited by the ignition pin when the fire spark comes out. Please try to adjust the angle of the ignition pin to align the nozzle and try again.

• Q: If the products are broken during the warranty, what should I do?

           A: Don’t worry, MOKA SFX has a professional foreign trade team and helps you to solve all problems with our products in time. Please send us pictures or videos if there is a problem with the products. We will guide you on how to fix it and provide spare parts for free if needed.

• Q: What are the control modes of the flame machines?

           A: DMX Control and Electric control (H-E01, H-E02)

                  DMX control means connecting the DMX cable and then through the DMX controller to control the machine.

                  Electric control means turning on power then working, turning off power then stopping working.

• Q: What is the control mode of H-E04?

           A: Control by DMX.

• Q: What is the safe channel?

           A: When you use the DMX controller to control the machine, channel 1 is a safety channel with values of 102-153 open, indicating the fire projector safe channel is open and the machine can work.

• Q: What is the dumping switch?

           A: When the machine tilts over 45°, the power will be cut off automatically and the flame projector stop working instantly, ensuring the security of the event.

• Q: How high can the spray be?

           A: H-E01: Spray1-3M;

               H-E02: Spray2-4M;

               H-E03: Spray1-3M;

               H-E04: Spray5-6M;

               H-E05: Spray1-3M;

               H-E01A: Spray1-2(LPG Flame machine);

               H-E03A: Spray1-2M(LPG Triple-head flame machine ).

• Q: Which flame machine can spray the highest? How many meters can it reach?

           A: New Four Heads Flame Machine H-E04. 4 bottles of flame oil working together, enough pressure can spray 5-6M.