MOKA SFX MK-CN07 New Model Single Head Confetti Launcher Equipment

• Package included/each unit:

          Single-head confetti machine

          Dmx cable

          Manual

          Power connector

          Remote control

 

●Installation:

       1. Please put the machine in its proper place.

       2. Adjust the angle of the machine via Angle adjustable knob as you want.

       3. Connect the machines and dmx controller with dmx cables.

       4. Plug in power cable into a power socket.

       5. The machine is controlled by dmx512, it has 5 channels

       6. First set the dmx address of the machine, and turn on the power of the dmx controller, the green LED light in the dmx dips will be on if the machine power is on also.

       7. Turn on the machine power, the Power Indicator will be on then.

       8. Output the dmx signal to the machines, and let the machine in ready status.

       9. Put the electric confetti cannon in the holder and screw up it.

     10. If already, you could use the controller to control the machine to shoot the electric confetti cannon.

 

Shipping

• U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
• Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
• Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region, and it is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.

 

Q&A

• Q: Can the machine spray ribbons except spray confetti paper?

          A: Yes, the machine can spray confetti cartridges filled with confetti paper ribbons.

 

• Q: What is the adjustable angle of the machine?

          A: MK-CN07, MK-CN07 New Model, MK-CN03: Adjustable to 180 degrees.

              MK-CN07A, MK-CN03A: 360-degree adjustable battery

              MK-CN04: 180 degrees front and rear adjustable; 180 degrees left and right

 

• Q: What are the advantages of using a machine to open confetti cartridges than to open them directly by hand? Wouldn't it be easier to open directly with your hands?

          A: For small parties and other events, it may be more convenient to open confetti cartridges directly with your hands. However, if your field is relatively large, you can also save manpower, and you can control the number of launches at any time when you launch more than one. Especially in some large-scale performances, the height that can be sprayed with confetti paper or ribbon by our machine will be higher, to achieve better results.

 

• Q: Can you engrave my logo? What’s the MOQ?

          A: Yes, we can engrave your logo. 

               Free engraving for 6 and above, below 6pcs, you need to pay extra.

 

• Q: Received the machine just now, but the Power Indicator is not On, what is the problem?

          A: May Power cable is not connected, pls check if the power cable is connected or change one new power cable.

               You may bought a bad-quality confetti cartridge, please change the batch of confetti cartridges.

 

• Q: How long is your warranty? How about after-sales service?

          A: We promise a year warranty. If there is any quality problem, we offer accessories for free. Charges for repairs for parts over one year.

• Q: Why the motherboard is burned?

          A: Poor quality fireworks can easily touch the line itself, and it will short circuit and not need high current.

              Besides, it also will burn the resistance of machine and socket.

 

• Q: How often does the machine's fuse burn?

          A: The fuse is burned may caused by unstable voltage. So the machine is not working.

 

• Q: Is there any requirement for a confetti cartridge?

          A: You’d better buy a good quality confetti cartridge. Select the length according to your needs.

• Q: What’s the difference between buying a piece confetti launcher and a one-piece double barrel confetti launcher?

          A: First of all, the price of 2 pieces signal head confetti machine is almost double head that of one piece two heads confetti machine. But they had the same effect.

               Secondly, if you want to control a piece popper, a one-piece double heads confetti machine can make it. But for one head confetti machine, you need to connect them in series.

 

• Q: Is there a delay in remote control?

          A: There is a little bit delay.

• Q: Received the machine just now, Power is On, what is the problem?

          A: Please check if the DMX cable is good, if so. Please check dmx address was the wrong setting.

• Q: If I have two confetti machines connected in series, how to make them spray separately?

          A: You just need to set the DMX address. The first machine is set d001 and the second one is set d002. In this situation, the channels of the first machine are channel 1 to channel 6, channels of the second machine are 7 to 12.

 

• Q: The machine can’t be controlled by a remote controller, what’s the reason?

          A: (1)Please check if the remote controller has power.

               (2)Please check if the remote mode is open. 

               (3)If it is opened. 

                a.Your remote may broken. Please change the remote to test it again. (Press the enter button on the machine---System settings---Wireless  You’ll see if the remote mode is opened, if it is closed, open it.)

               b.The resistance may be burned. We need to open the machine for a check. (see the photo, the part circled in red is resistance)

              (4)If the wireless mode is closed.

                 Please press the first remote switch button towards the back of the machine. Four indicators will turn on one by one. When you press the second bottom, the middle two indicators will light up.

                  Press the bottom“-” indicators off one by one. Press the”+”bottom, all indicators light up once.

                  At that time you can control the machine by a remote.

• Q: How to set English?

          A: Press the fourth bottom to enter” display setting”, when you see”1. Language”, select English.