- Spray Height can reach 6-12m.
- Fireworks can adjust the angle 360 degrees.
- DMX512 / Remote Control mode, easy to use.
- Confetti Cannon has a built-in 1800mah lithium battery used anytime, anywhere.
- Independent research and development of lithium battery with short circuit protection.
- Specification :
Voltage : DC12V
Power : 60W
Control Mode : DMX512 / Remote
DMX Channel : 4 Channel
Spray Height : 6-12 m
Charging Time : 4 Hrs
Remote Distance : 50m
Battery Capacity : 1800mAH
N.W : 3KG
G.W : 3.5KG
Product Size : 36 x 12 x 22 cm
Packing Size : 38 x 17 x 24.5 cm
- 6 Channel Description :
Channel 1 : Single Shot To Spray
Channel 2 : Another Shot To Spray
Channel 3 : 2 Shot Spray Together
Channel 4 : From Left to Right (Multiple in series)
Channel 5 : From Right to Left (Multiple in series)
Channel 6 : From the middle to both sides (Multiple in series)
How To Use
- INSTRUCTIONS :
1. 2 confetti cannons need to be loaded into the barrel(s) of the 2 Shots Streamer Launcher. Each cannon is held in place in the barrel with a thumbscrew, The angle of the transmitter can be adjusted.
2. Open the power.
3. The 2 Shots Streamer Launcher can be operated with DMX or remote, Refer to the above instructions.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
- Q: Can the machine spray ribbons except for spray confetti paper?
A: Yes, the machine can spray confetti carriage filled with confetti paper ribbons.
- Q: How high can the machine spray?
A: It can spray 6-12 meters
- Q: Do you sell confetti cartridges?
A: As confetti cartridge is defined as flammable and explosive products, we cannot send you. You can buy it locally.
- Q: Where can I buy confetti cartridge?
A: You can buy it on Amazon, Taobao, or locally, it's easy to buy.
- Q: What is the adjustable angle of the machine?
A: MK-CN07, MK-CN03: 180 degrees adjustable
MK-CN07A, MK-CN03A: 360-degree adjustable battery
MK-CN04: 180 degrees front and rear adjustable; 180 degrees left and right
- Q: What are the advantages of using a machine to open confetti cartridge than to open them directly by hand? Wouldn't it be easier to open directly with your hands?
A: For small parties and other events, it may be more convenient to open a confetti cartridge directly with your hands. However, if your field is relatively large, you can also save manpower, and you can control the number of launches at any time when you launch more than one. Especially in some large-scale performances, the height that can be sprayed with confetti paper or ribbon by our machine will be higher, to achieve better results.
- Q: Does the confetti cartridge have a different sizes? How about the spray height?
A: Yes, confetti cartridges come in different sizes. There is 40.60.80cm.
40cm: spray 5-8 meters
60cm: spary 8-10 meters
80cm: spray 10-12 meters
40cm Ribbon carridge: spray 5-8 meters
80cm Ribbon carridge: spray 10-12 meters
- Q: Can you engrave my logo? What’s the MOQ?
A: Yes, we can engrave your logo.
Free engrave for 6 and above, below 6pcs, you need to pay extra.
- Q: Received the machine just now, but Power Indicator is not On, what is the problem?
A: May Power cable is not connected, pls check if the power cable is connected or change one new power cable.
You may buy a bad quality confetti cartridge, please change a batch of confetti cartridges.
- Q: How many channels of the machine?
A: MK-CN07, MK-CN07A only has 1 channel, it will spray after you connect DMX.
But there are 4 channels when multiple in series:
Channel 1: Spray Together (multiple in series)
Channel 2: From Left to Right(multiple in series)
Channel 3: From Right to Left(multiple in series)
Channel 4: From the middle to both sides(multiple in series)
MK-CN03, MK-CN03A has 6 channels:
Channel 1: spray the first one
Channel 2: spray the second one
Channel 3: spray all
Channel 4: spray from left to right
Channel 5: spray from right to left
Channel 6: spray from middle to both sides (series connection)
MK-CN04 has 6 channels ：
Channel 1: spray the first one
Channel 2: spray the second one
Channel 3: spray the third one
Channel 4: spray the fourth one
Channel 5: spray the second, third, fourth one
Channel 6: spray from left to right
- Q: Can I reuse the confetti cannon?
A: No. They only can be used one time.
- Q: Why the confetti cartridge are not sprayed?
A: You may buy a bad quality confetti cartridge, please change a batch of confetti cartridge.
- Q: How long is your warranty? How about after-sale service?
A: We promise one year warranty. If there is any quality problem, we offer accessories for free. Charges for repairs for parts over one year.
- Q: Why the motherboard is burned?
A: Poor quality fireworks can easily touch the line itself, and it will short circuit not need high current.
Besides, it also will cause burning the resistance of machine and socket.
- Q: How often does the machine's fuse burn?
A: The fuse is burned may be caused by unstable voltage. So the machine is not working.
- Q: Is there any requirement for a confetti cartridge?
A: You’d better buy good quality confetti cartridge. And select the length according to your need.
- Q: What’s the difference between buying a two-piece confetti launcher and a one-piece double barrel confetti launcher?
A: First of all, the price of 2 pieces signal head confetti machines is the almost double head that of one piece two heads confetti machine. But they got the same effect.
Secondly, if you want to control one piece popper, one-piece double heads confetti machine can make it. But the for one head confetti machine, you need to connect them in series.
- Q: Is there a delay in the remote control?
A: There is a little bit of delay.
- Q: Received the machine just now, Power is On, what is the problem?
A: Please check if the DMX cable is good, if so. Please check Dmx address was the wrong setting?
- Q: If I have two confetti machines connected in series, how to make them spray separately?
A: You just need to set a DMX address. The first machine is set d001 and the second one is set d002. In this situation, the channels of the first machine are channel 1 to channel 6, channels of the second machine are 7 to 12.
- Q: The machine can’t be controlled by a remote controller, what’s the reason?
A: (1)Please check if the remote controller has power.
(2)Please check if the remote mode is opened.
(3)If it is opened.
a.Your remote may break. Please change a remote to test it again.(Press the enter bottom on machine---System settings---Wireless You’ll see if the remote mode is opened, if it is closed, open it.)
b.The resistance may be burned. We need to open the machine for a check. (see the photo, the part circled in red are resistance)
(4)If the wireless mode is closed.
Please press the first remote switch button towards the back of the machine. Four indicators will turn on one by one. When you press the second bottom, the middle two indicators will light up.
Press the bottom“-” indicators off one by one. Press ”+” bottom, all indicators light up once.
At that time you can control the machine with a remote.
- Q: How to set English?
A: Press the fourth bottom enter” display setting” when you see”1. Language”, select English.
- Q: What kind of battery does the remote control use? What is the battery capacity?
A: The remote uses 23A, 12V voltage.
- Q: Can I make MK-CN04 spray all at the same time or spray one by one?
A: There is 4 holders. You can make it spray one by one after you insert the popper into the holder.
- Q: Does the battery confetti machine not need to connect the power cable and Dmx cable?
A: For the battery confetti machine it’s no need to connect the power cable after it is fully charged.
When the machines are under series connection, you need to connect them with a controller via Dmx cable. And it’s better to control the machines when you want them to work at the same time as there is no delay.
- Q: Can battery launchers be shipped by air?
A: Sorry, no.
- Q: How long does it take to fully charge the battery launcher? How long can it be used?
A: It takes 4 hours to full charge; It can be used for 3 hours.
- S'ouvre dans une nouvelle fenêtre.