MOKA SFX MK-CN07 New Model Single Head Confetti Launcher Equipment

• Package included/each unit:

          Single-head confetti machine

          Dmx cable

          Manual

          Power connector

          Remote control

 

●Installation:

       1. Please put the machine in its proper place.

       2. Adjust the angle of the machine via Angle adjustable knob as you want.

       3. Connect the machines and dmx controller with dmx cables.

       4. Plug in power cable into power socket.

       5. The machine is controlled by dmx512, it have 5 channels

       6. First set the dmx address of the machine, turn on the power of dmx controller, the green led light in the dmx dips will be on-if the machine power is on also.

       7. Turn on the machine power, the Power Indicator will be on then.

       8. Output dmx signal to the machines, let the machine in ready status.

       9. Put the electric confetti cannon in the holder and screw up it.

     10.If all ready, you could use the controller to control the machine to shot the electric confetti cannon then.

 

Shipping

• U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
• Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
• Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
• China warehouse: 7-20 working days for direct shipment from China.
• The transportation type depends on the region, and it is uniformly displayed as international shipping. 
• The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
• If you have any questions, please leave a message.

 

Q&A

• Q: Can the machine spray ribbons except spray confetti paper?

          A: Yes, the machine can spray confetti carridge filled with confetti paper ribbons.

 

• Q: What is the adjustable angle of the machine?

          A: MK-CN07, MK-CN07 New Model, MK-CN03: Adjustable to 180 degrees.

              MK-CN07A, MK-CN03A: 360-degree adjustable battery

              MK-CN04: 180 degrees front and rear adjustable; 180 degrees left and right

 

• Q: What are the advantages of using a machine to open confetti carridge than to open them directly by hand? Wouldn't it be easier to open directly with your hands?

          A: For small parties and other events, it may be more convenient to open confetti carridge directly with your hands. However, if your field is relatively large, you can also save manpower, and you can control the number of launches at any time when you launch more than one. Especially in some large-scale performances, the height that can be sprayed with confetti paper or ribbon by our machine will be higher, to achieve better results.

 

• Q: Can you engrave my logo? What’s the MOQ?

          A: Yes, we can engrave your logo. 

               Free engrave for 6 and above, below 6pcs, you need to pay extra.

 

• Q: Received the machine just now, but Power Indicator is not On, what is the problem?

          A: May Power cable is not connected, pls check if the power cable is connected or change one new power cable.

               You may bought bad quality confetti carridge, please change a batch of confetti carridge.

 

• Q: How long is your warranty? How about after sale service?

          A: We promise one year warranty. If there is any quality problem, we offer accessories for free. Charges for repairs for parts over one year.

• Q: Why the motherboard is burned?

          A: Poor quality fireworks can easily touch the line itself, and it will short circuit not need high current.

              Besides, it also will cause burning the resistance of machine and socket.

 

• Q: How often does the machine's fuse burn?

          A: The fuse is burned may caused by unstable voltage. So the machine is not working.

 

• Q: Is there any requirement for confetti carridge?

          A: You’d better buy good quality confetti carridge. And select the length according to your needed.

• Q: What’s the difference of buying two piece confetti launcher and one piece double barrel confetti launcher?

          A: First of all, the price of 2 pieces signal head confetti machines is almost double head that of   one piece two heads confetti machine. But they got same effect.

               Secondly, if you want to control one piece popper, one piece double heads confetti machine can make it.But the for one head confetti machine, you need to connect them in series.

 

• Q: Is there a delay in remote control?

          A: There is a little bit delay.

• Q: Received the machine just now, Power is On, what is the problem?

          A: Please check if the DMX cable is good, if so. Please check dmx address was wrong setting?

• Q: If I have two confetti machines connected in series, how to make them spray separately?

          A: You just need to set DMX address. The first machine is set d001 and the second one is set d002. In this situation, channels of first machine is channel 1 to channel 6, channels of the second machine is 7 to 12.

 

• Q: The machine can’t be control by a remote controller, what’s the reason?

          A: (1)Please check if the remote controller has power.

               (2)Please check if remote mode is opened. 

               (3)If it is opened. 

                a.Your remote may broken. Please change a remote to test it again.(Press the enter bottom on machine---System settings---Wireless  You’ll see if the remote mode is opened, if it is closed, open it.)

               b.The resistance may be burned. We need to open the machine for a check. (see the photo, the part circled in red are resistance)

              (4)If the wireless mode is closed.

                 Please press the first remote switch button towards the back of the machine. Four indicators will turn on one by one. When you press the second bottom, the  middle two indicator will light up.

                  Press the bottom“-”indicators off one by one. Press ”+”bottom, all indicators light up once.

                  At that time you can control the machine by a remote.

• Q: How to set English?

          A: Press the fourth bottom enter”display setting”, when you see”1. Language”, select English.