- Very safe spark spray machine, the spark temperature is only 45 degrees, you can even touch it with your hands, can use it indoors or outdoors, don't worry about fire problems
- 650W Cold sparklers support wireless remote control, DMX512 and LCD.
- The cold sparker is smokeless and tasteless, touchable sparks, non-irritating.
- The cold sparkler machine is dumping that stops, which improves the safety factor.
- The fountain height can reach 1-5 meters indoors and 3-5 meters outdoors.
- Flame-resistant ABS material, honeycomb design, high-quality cooling system.
The Ti powder and the machine are shipped separately and sold separately, so don’t forget to buy the powder when buying the machine.
- Our Advantages:
1. No smoke; no foul smell
2. Touchable spark, very safe, no traditional danger, and no irritant
3. Easy to carry and convenient for transportation
4. Low consumption; environmentally friendly
5. Wireless control support, LCD and Dmx, operate is easier and convenient in various places
6. The sparkler machine is an indoor and outdoor sparkler firework fountain cold machine, removing traditional pyrotechnics techniques.
7. The product is widely used in all kinds of large and medium show performances, weddings, discos, nights club, etc.
Input: 110v/220v ac, 50/60hz
Power Consumption: 650w
Maximum connections: 6 pcs
Fountain height: adjustable 2-4m indoor, 3-5m outdoor
Fountain Direction: vertical
Working temperature: -10 ℃ to 50 ℃
Warm-up time: less than 8 minutes
Up to 10-20min shooting time after filling
Housing: anti-flaming abs, honeycomb design, high-quality cooling system
Ratio: Dmx double input interfaces, power control double input interfaces ac and out
Control mode: Dmx 512, wireless remote control
Support adjust spray output
The sparkling effect of granules, excluding hazardous chemicals
Refill consumables: titanium alloy granules
Usage: more than 15 minutes continuously per 200g of powder
Outer packing: foam box or flight case (please contact me if necessary)
Net weight: 5.2kg
Packing size: 31*31*35cm
Gross weight: 7kg
- Packing List:
1pc Sparkler Machine
1pc wireless remote controller with no battery inside
1pc power cord
1pc DMX Cable
1pc User Manual
- Notice: This order does not include powder, please contact me if you need powder. Thank you.
How To Use
- This product has two modes of operation: console, remote control:
1. Remote control conventional spraying operation process:
➊ link the machine power cord, open the power switch.
➋ press (power key) to link the machine; display FHH that the link is successful.
➌ press (HEAT ON/OFF) to start heating (the display will show the dynamic temperature figures in real-time); wait for the green light is always on that is the completion of heating can spray flowers.
➍ press (HIGH1/HIGH2/HIGH3) to start spraying flowers.
2. Remote control special effects spraying operation process:
➊ link the machine power cord, turn on the power switch.
➋ press (power key) to link the machine; display FHH that the link is successful.
➌ Adjust each machine effect address code in turn by pressing the address code button on each machine; the middle number of the display will show the corresponding number or letter (letters A, B, C, D, E, F correspond to the 10th letter). The middle number of the display will show the corresponding number or letter (letter A, B, C, D, E, F corresponds to the 10th to 15th respectively) as follows 3 (up to 15 units).
➍ Press (+NO.- key) to adjust the number of special effects spraying machines; the number behind the display will show the corresponding number or letter (letters A, B, C, D, E, F correspond to the 10th to 15th, respectively) as shown in the figure below, the number 4 on the right side represents the total number of spraying machines is 4 (here must be adjusted to correspond to the number, the maximum is 15).
➎ Press (HEAT ON/OFF) to start heating (the display will show the dynamic temperature figures in real-time); wait for the green light is always on that is, the heating is complete to spray flowers.
➏ press (special effects A-type or B-type key button) to achieve the corresponding special effects spraying.
3. Control panel operation process:
➊ link the machine power cable, link the DMX signal cable, turn on the power switch, DMX blue indicator light is a successful DMX signal link.
➋ a channel pushed to the top of the machine began to heat, (the display will show the dynamic temperature figures in real-time); waiting for the green light is always on that is, the heating is complete can spray flowers.
➌ push the second channel to start spraying flowers.
Note: when the fault light is on, pls turn off the power of the machine in time, to avoid extra damage, and users are expected to restart the machine until the fault light is off.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
- Q: If I use this spark machine, will it cause a fire, or cause the smoke alarm to go off?
A: Our fire-breather can be used indoors or outdoors, as long as it is kept at a relatively safe distance, it will not cause a fire or cause the smoke alarm to go off. And our machine is equipped with a safety channel, when the machine is tilted more than 45 degrees, the spark machine will immediately stop working to improve the safety of use.
- Q: Do I need to get a security clearance to use your spark machine or floral sprayers?
A: From the customers, we have worked within Europe, America, and other countries, there is no need to obtain security clearance to use our machines.
- Q: How high can spray?
A: Indoor powder can spray 1.5-4M; Outdoor powder can spray 2-5M
- Q: What are the control modes?
A: DMX Control and Remote control, Control by DMX controller, F1-F10M, each F means0.5M, Control by remote, 1/2/3 cut means different spray height. Attached remote picture for your reference.
- Q: What is the consumable used?
A: Spark Fuel / Powder have indoor powder and outdoor powder
The difference is the height of the spray
Material is Titanium Alloy, Work Temp. : -20℃~ 70 ℃
- Q: What is the weight of a bag of powder, how long can it be sprayed?
A: 200g/bag, can be working 15-20mins.
- Q: Can we use the remote control?
A: MK-E11 MK-E12 MK-E15 Could be used Dmx and remote control; MK-E16 New Moving head spark machine use Dmx control only at present, without the remote control. But add remote control in the future.
- Q: Can I adjust the height of the spark?
A: Yes, you can adjust spray height by dmx control.Using remote control 1/2/3 to adjust spray height through.
- Q: Can I control many machines with one remote or one dmx controller?
A: Yes, can control many machines with one remote or one dmx together.
- Q: Where can I buy spark fuel /Powder?
A: Can be purchased from us, your local market, and Amazon, Ebay.
- Q: What is the reason the machine can’t pre-heating?
A: ①The heating rod is broken;
②the mainboard has a problem;
③the heat is blocked and the temperature is too high.
- Q: What’s the difference between MK-E11 and MK-E15?
A: MK-E11 Use Chain
MK-E15 Use gear
MK-E15 low noise than MK-E11
MK-E15 Small one, save shipping cost
MK-E11 has more spark compared with MK-E15
- Q: Except fall spark machine, another spark machine also can be used upside down?
A: Not Yet
- Q: What happens if I connected more than 6pcs machines together?
A: Connect over 6pcs together, maybe cause damage or fire due to current and voltage may exceed load.
- Q: Pre-heating time? how long is the pre-heating time of the second time?
A: Pre-heating time is 4-5mins, Intermittent pre-heating time due to working time, almost 1°equal to 1S, can be working when the temperature reached 500°.
- Q: What's the temperature of the spark?
A: Temperature is 70-80℃ by Temperature measurer. The temperature of the human body touched is 40℃.
You may also like
- S'ouvre dans une nouvelle fenêtre.