Description
Description
- No smoke, no pungent smell.
- Touchable sparks, very safe, no traditional danger, and no irritation.
- Easy to carry and convenient for transportation.
- Low consumption; environmentally friendly.
- With wireless control support, LCD, and Dmx, the operation is easier and more convenient in different places.
Please Note
The Ti powder and the machine are shipped separately and sold separately, so don’t forget to buy the powder when buying the machine.
Technical Parameter
- Specification:
Input: 110v/220v ac, 50/60hz
Power Consumption: 750w
Maximum connections: 6 pcs
Fountain height: adjustable 2-4m indoor, 3-5m outdoor
Fountain Direction: Vertical
Working temperature: -10 ℃ to 50 ℃
Warm-up time: less than 8 minutes
Up to 10-20min shooting time after filling.
Housing: anti-flaming abs, honeycomb design, high-quality cooling system
Ratio: Dmx double input interfaces, power con double input interfaces ac and out
Control mode: Dmx 512, wireless remote control. support adjust spray output
Spark effect of granules, excluding hazardous chemicals.
Refill consumables: titanium alloy granules
Usage: more than 15 minutes continuously per 200g of powder
Outer packing: foam box or flight case (please contact me if necessary)
Dimensions: 24*22*31mm
Packing size: 32*32*35cm
Gross weight: 10kg
- Packing List:
1pc Sparkler Machine
1pc wireless remote controller with no battery inside
1pc power cord
1pc DMX cable
1pc user manual
How To Use
This product has two modes of operation: console, remote control
1. Remote control conventional spraying operation process:
➊ Link the machine power cord, open the power switch
➋ Press (power key) to link the machine; display FHH that the link is successful
➌ press (HEAT ON/OFF) to start heating (the display will show the dynamic temperature figures in real-time); wait for the green light always on that is the completion of heating can spray flowers
➍ press (HIGH1/HIGH2/HIGH3) to start spraying flowers.
2. Remote control special effects spraying operation process:
➊ Link the machine power cord, turn on the power switch
➋ Press (power key) to link the machine; display FHH that the link is successful
➌ Adjust each machine effect address code in turn by pressing the address code button on each machine; the middle number of the display will show the corresponding number or letter (letters A, B, C, D, E, F correspond to the 10th letter). The middle number of the display will show the corresponding number or letter (letters A, B, C, D, E, and F correspond to the 10th to 15th respectively) as follows 3 (up to 15 units)
➍ Press (+NO.- key) to adjust the number of special effects spraying machines; the number behind the display will show the corresponding number or letter (letters A, B, C, D, E, F correspond to the 10th to 15th, respectively) as shown in the figure below, the number 4 on the right side represents the total number of spraying machines is 4 (here must be adjusted to correspond to the number, the maximum is 15)
➎ Press (HEAT ON/OFF) to start heating (the display will show the dynamic temperature figures in real-time); wait for the green light is always on that is, the heating is complete with spraying flowers
➏ Press (special effects A-type or B-type key button) to achieve the corresponding special effects spraying.
3. Control panel operation process:
➊ link the machine power cable, link the DMX signal cable, and turn on the power switch, The DMX blue indicator light is a successful DMX signal link
➋ A channel pushed to the top of the machine began to heat, (the display will show the dynamic temperature figures in real-time); waiting for the green light is always on that is, the heating is complete can spray flowers
➌ push the second channel to start spraying flowers
Note: when the fault light is on, pls turn off the power of the machine in time, to avoid extra damage, and users are expected to restart the machine until the fault light is off.
Shipping
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region and is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
Q&A
- Q: If I use this spark machine, will it cause a fire, or cause the smoke alarm to go off?
A: Our fire-breather can be used indoors or outdoors, as long as it is kept at a relatively safe distance, it will not cause a fire or cause the smoke alarm to go off. And our machine is equipped with a safety channel, when the machine is tilted more than 45 degrees, the spark machine will immediately stop working to improve the safety of use.
- Q: Do I need a security clearance to use your spark machine or floral sprayers?
A: From the customers, we have worked with in Europe, America, and other countries, there is no need to obtain security clearance to use our machines.
- Q: How high can the spray be?
A: Indoor powder can spray 1.5-4M; Outdoor powder can spray 2-5M
- Q: What are the control modes?
A: DMX Control and Remote control, Control by DMX controller, F1-F10M, each F means 0.5M, Control by remote, 1/2/3 cut means different spray height. Attached remote picture for your reference.
- Q: What is the consumable used?
A: Spark Fuel / Powder has indoor powder and outdoor powder
The difference is the height of the spray
Material is Titanium Alloy, Work Temp. : -20℃~ 70 ℃
- Q: What is the weight of a bag of powder, how long can it be sprayed?
A: 200g/bag, can be working 15-20mins
- Q: Can we use the remote control?
A: MK-E11 MK-E12 MK-E15 Could use DMXand remote control; MK-E16 New Moving head spark machine uses DMX control only at present, without the remote control. But add remote control in the future.
- Q: Can I adjust the height of the spark?
A: Yes, you can adjust spray height by dmx control.
Using remote control 1/2/3 to adjust spray height through.
- Q: Can I control many machines with one remote or one DMX controller?
A: Yes, can control many machines with one remote or one dmx together.
- Q: Where can I buy spark fuel /Powder?
A: Can be purchased from us, your local market, Amazon, or eBay.
- Q: What is the reason the machine can’t pre-heating?
A: ①The heating rod is broken;
②the mainboard has a problem ;
③the heat is blocked and the temperature is too high
- Q: What’s the difference between MK-E11 and MK-E15?
A: MK-E11 Use Chain, MK-E15 Use gear, MK-E15 low noise than MK-E11
MK-E15 Small one saves shopping cost
MK-E11 has more spark compared with MK-E15
Different effects
- Q: Except fall spark machine, another spark machine also can be used upside down?
A: Not Yet
- Q: What happens if I connect more than 6 PC machines together?
A: Connect over 6 PC together, which may cause damage or fire due to current and voltage exceeding load.
- Q: Pre-heating time? how long is the pre-heating time for the second time?
A: Pre-heating time is 4-5mins, Intermittent pre-heating time due to working time, almost 1°equal to 1S, can be working when the temperature reached 500°.
- Q: What's the temperature of the spark?
A: Temperature is 70-80℃ by Temperature measurer.
The temperature of the human body touched is 40℃
You may also like
Recently viewed
- Opens in a new window.