- Confetti cannon machine with manual control, the range can reach about 10 meters, covering an area of up to 150 square meters.
- Mini confetti blower aviation box packaging using aviation aluminum frame, universal wheel design, not only easy to use, and the appearance of beautiful and durable.
- The confetti blaster machine stays in the air for a long time, and a large amount of confetti instantly gushes out, creating a shocking effect of flying in the sky.
- Confetti blaster machine free control of wind, side cooling holes, which is conducive to extending the life of the machine, increase the use of the machine time.
- Suitable for Halloween, Christmas, weddings, and all types of performances.
- Product Specification :
Voltage: 220V/50Hz(or 110V/60Hz).
Product Size: 55*22*19cm.
Packing Size : 60*16.5*25.5cm.
Control mode:DMX 512&Remote
DMX Channel: 8 Channels Channel 1: shot 1
Channel 1: shot 1
Channel 2: shot 2
Channel 3: shot 3.
Channel 4: shot 4.
Channel 5: shot 1,2,3,4.
Channel 6: shot from left to right.
Channel 7: shot from right to lift.
Channel 8:Shot from middle to aside.
Remote control operation instructions.
On key: full open.
Left and right keys: open from the middle to both sides.
+ key: open from left to right.
-key: open from right to left.
- Please note :
Shipping does not include the confetti paper stick, if you need this, please contact us before ordering. That we have different power plus united kingdom plug, au plug, EU plug, USA plug, please let us know the power supply you need, or we will choose everything according to your country.
How To Use
1. Open the packing box, count the accessories accompanied, read the manual carefully.
2. The machine works with electric confetti cannon (need purchase separately).
3. Please check all parts of the machine are intact before ﬁrst use.
4. Check the electric power and socket are in compliance with requirements.
5. Please put the machine in its proper place.
6. Adjust the angle of the machine via Angle adjustable knob as you want.
7. Connect the machines and Dmx controller with Dmx cables.
8. Plug the power cable into a power socket.
9. The machine is controlled by dmx512, it has 6 channels.
10. First set the Dmx address of the machine, turn on the power of the Dmx controller, the green led light in the Dmx dips will be on-if the machine power is on also.
11. Turn on the machine power, the Power Indicator will be on then.
12. Output Dmx signal to the machines, let the machine in ready status.
13. Put the electric confetti cannon in the holder and screw up it.
14. Put the cable of the electric confetti cannon into the cable socket, notice the placing sequence when four shots (there are numbers to show the s sequence), check the indicator, if light, the cannon is good.
15. If already, you could use the controller to control the machine to shoot the electric confetti cannon then.
- U.S. warehouse: 2-5 working days in the U.S., 7-12 working days in other areas.
- Spain warehouse: 2-4 working days in Spain, 7-12 working days in other EU regions.
- Poland warehouse: 2-4 working days in Poland, 7-12 working days in the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region, and it is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days.After the logistics order number is generated, the customer service will send an email to notify you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
- Q: How long is your warranty? How about after-sale service?
A: We promise one year warranty. If there is any quality problem, we offer accessories for free. Charges for repairs for parts over one year.
- Q: Can the machine spray ribbons except for spray confetti paper?
A: Yes, the machine can be sprayed inside the confetti-filled shells and inside the confetti-filled shells.
- Q: Do you sell confetti cartridges?
A: As confetti cartridge is defined as flammable and explosive products, we cannot send you. You can buy it locally.
- Q: Does the confetti cartridge have a different size? How about the spray height?
A: Yes, confetti carridge come in different sizes. There is 40.60.80cm.
40cm: spray 5-8 meters;
60cm: spary 8-10 meters;
80cm: spray 10-12 meters;
40cm Ribbon carridge: spray 5-8 meters;
80cm Ribbon carridge: spray 10-12 meters.
- Q: Received the machine just now, but Power Indicator is not On, what is the problem?
A: May Power cable is not connected, pls check if the power cable is connected or change one new power cable. You may buy bad quality confetti cartridges, please change a batch of confetti cartridges.
- Q: Can I reuse the confetti cannon?
A: No. They only can be used one time.
- Q: Why the confetti cartridge are not sprayed?
A: You may buy a bad quality confetti cartridge, please change a batch of confetti cartridges.
- Q: Why the motherboard is burned?
A: Poor quality fireworks can easily touch the line itself, and it will short circuit not need high current. Besides, it also will cause burning the resistance of machine and socket.
- Q: How often does the machine's fuse burn?
A: The fuse is burned may be caused by unstable voltage. So the machine is not working.
- Q: Is there any requirement for a confetti cartridge?
A: You’d better buy a good quality confetti cartridge. And select the length according to your need.
- Q: Received the machine just now, Power is On, what is the problem?
A: Please check if the DMX cable is good, if so. Please check Dmx address was the wrong setting.
- Q: If I have two confetti machines connected in series, how to make them spray separately?
A: You just need to set a DMX address. The first machine is set d001 and the second one is set d002. In this situation, the channels of the first machine are channel 1 to channel 6, channels of the second machine are 7 to 12.
- Q: How many channels of the machine?
A: MK-CN04 has 6 channels:
Channel 1: spray the first one;
Channel 2: spray the second one;
Channel 3: spray the third one;
Channel 4: spray the fourth one;
Channel 5: spray the second, third, fourth one;
Channel 6: spray from left to right.
- Q: Can I make MK-CN04 spray all at the same time or spray one by one?
A: There are 4 holders. You can make it spray one by one after you insert the popper into the holder.
- Q: What is the adjustable angle of the machine?
A: MK-CN04: 180 degrees front and rear adjustable; 180 degrees left and right.
- Abre en una nueva ventana.