Super cool!
All the machines are sold without a dmx controller, if you need one, please purchase additionally:
MINI BATTERY DMX CONSOLE 24CHS BATTERY CONTROLLER





| Category | Specification |
| Voltage | AC110/220V 50-60Hz |
| Power | 120W |
| Flame Height | 2-4M |
| Control Mode |
DMX512/Electric Control |
| DMX Channel |
2 Channels Channel 1: Safety Channel Channel 2: Spray |
| Color | fire red (depends on the color of the flame oil) |
| Consumables | Flame Liquid & Starting Liquid |
| Net Weight | 6kg |
| Gross Weight | 7kg |
| Product Size | 22.5×22.5x33cm |
| Package Size | 29x29x39cm |
| Component | Power Cord, DMX Cord,User manual |
Flame Liquid & Starting Liquid are not included due to shipping restrictions. They are classified as flammable liquids and cannot be shipped with the machine. Please purchase suitable consumables locally and follow your local safety regulations.
Open the door of the flame machine, place 2 flame liquid cans on the holder, and make sure they are fixed correctly. Then close the door.
Connect the flame machine to the power supply and turn on the power switch. Connect the DMX signal cable to the machine and DMX controller, then set the DMX address. The machine will perform a DMX self-check, and the indicator light will flash. When the DMX signal cable is connected properly, the display will light up.
The flame machine is equipped with a safety channel. The machine can only work when Channel 1 is set between 100 and 155. Activate the safety channel, then use Channel 2 to spray flames.
After use, turn off the machine and disconnect the power cord and DMX signal cable.
Wait 15 minutes until the machine has cooled down. Then remove the flame liquid cans and wipe the machine clean.
Please read the user manual carefully before using this product.
A: Websites for buying starting fluid in various countries:
USA: https://www.amazon.com/Valvoline-602373-11-Starting-Fluid/dp/B00PWLS7HU/ref=mp_s_a_1_5?ie=UTF8&qid=1545973834&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=valvoline+s
Europe: https://www.amazon.de/dp/B007VMGD7E/ref=cm_sw_r_wa_api_i_Y-R5CbDJ8WX0E
France: https://france-effect.com/recharge-flamme/recharge-dragon-tower-iii.html
A: Flame Oil, Flame Liquid, Starting liquid.
The main ingredient in the car starting fluid is Diethyl Ether, with some Petroleum Distillates, Propane or Butane, Lubricants, and CO2 added. Colored starting fluid has more Organic dyes added.
A: A 400ml fuel bottle will last approximately 60-70 seconds.
A: Our flame machine can be used indoors or outdoors, as long as it is kept at a relatively safe distance, it will not cause a fire or cause the smoke alarm to go off. And our machine is equipped with a safety channel, when the machine is tilted more than 45 degrees, the flamethrower will immediately stop working to improve the safety of use.
A: Our flame and spark machines are widely used by customers in Europe, the United States, and other markets. However, permit or licensing requirements may vary by country, region, and venue. Please confirm the local requirements with the relevant authority before use.
A: First of all, please confirm that all procedures with normal operation. It is recommended to cut off the power and operate it again, if fails again, the cause may be the valve is broken. Please cut off the power, and replace a new valve.
A: In this case, the angle of the ignition pin may be distorted, and the spray nozzle may not be aligned so that the spark cannot be ignited by the ignition pin when the fire spark comes out. Please try to adjust the angle of the ignition pin to align the nozzle and try again.
A: Don’t worry, MOKA SFX has a professional foreign trade team and helps you to solve all problems with our products in time. Please send us pictures or videos if there is a problem with the products. We will guide you on how to fix it and provide spare parts for free if needed.
A: DMX Control and Electric control (H-E01, H-E02)
DMX control means connecting the DMX cable and then through the DMX controller to control the machine.
Electric control means turning on power then working, turning off power then stopping working.
A: Control by DMX.
A: When you use the DMX controller to control the machine, channel 1 is a safety channel with values of 102-153 open, indicating the fire projector safe channel is open and the machine can work.
A: When the machine tilts over 45°, the power will be cut off automatically and the flame projector stop working instantly, ensuring the security of the event.
A: H-E01: Spray1-3M;
H-E02: Spray2-4M;
H-E03: Spray1-3M;
H-E04: Spray5-6M;
H-E05: Spray1-3M;
H-E01A: Spray1-2(LPG Flame machine);
H-E03A: Spray1-2M(LPG Triple-head flame machine ).
A: New Four Heads Flame Machine H-E04. 4 bottles of flame oil working together, enough pressure can spray 5-6M.