MOKA SFX MK-LD05C Wired LED Dance Floor Sensor Liquid LED Light Dance Floor

Description

• Waterproof rating-IP55.
  
• High-quality tempered glass - Scratch-resistant tempered glass load-bearing weight up to 500 kg per square meter, no need to worry about the load-bearing capacity.
• Wireless installation - Easy to install with the most beautiful appearance for an unforgettable experience.
• Rich color-3IN1 RGB color can be controlled by DMX, Sound control, remote control, WIFI, and PC control for the RGB full color.

Please note:

The size of each tile of the magnet model is 50*50*7cm, If you wish to customize the size and area of the floor tile lights according to your venue, Please contact our customer service

Technical Parameter

• Specification:                    

           Voltage: 90-240VAC, 50/60 Hz

           Power consumption: 30w

           Led QTY: 60 pcs 5050 SMD

           Color: RGB 3IN1

           Life-span: ≥100000h

           Surface Board: Tempered glass

           Waterproof: IP55

            Load-bearing: 500kg/m²

            Control mode: SD controller (supply DMX, sound control, remote control) PC controller.Note: The PC version needs to be customized

            Size: 500*500*70mm

            Weight: 11Kg

           Applicable places: DJs, bands, bars, pubs, clubs, skating rinks, KTV, family parties, birthdays, celebrations, weddings, festivals, shopping malls, stores, stores, and other designated places.  

Included accessories：

• Power Supply
• SD controller
• Protection Edge
• Flight case

The number of these accessories above, we will configure according to the number of floor tiles.

If you need special customization requirements or transportation needs, such as customs clearance and home delivery services, do not hesitate to contact customer service.

How To Use

• How to operate your MK-LD01 LED dance floor？

          1. Make sure the dance floor tile has enough charge or connect it to a power source.
          2. Use your remote control to power them on.
          3. When you power on, you will see the dance floor light in several colors.
          4. You may now use your sound system or DMX to change the light-up dance floor color codes. Your remote control may also make it easy to change the color code offering you more choices than the RMX and sound system.

• DMX Control Mode

          DMX is an acronym for ‘Digital Multiplex Signal.’ Also called DMX 512 because the signal controls up to 512 channels. Since the MK-LD01 3d LED dance floor possesses a 3 1 RGB color effect, the DMX controls 3 channels (colors).

• Sound Control Mode

          The sound control mode is responsible for changing the 3d LED dance floor’s effects. This is made possible by sound sensors that change light as the music plays. This sound sensor feature proves useful in the cases of bars, clubs, and music events. Its remote can control the sound activation mode, sound sensitivity, and light mode.

• Remote Control Mode

          This is a traditional way to control the 3D LED dance floor because you have to keep changing the lights, music, and effects manually. However, a remote control mode can control LED lights within the colorful dance floor to an average of 20 modes. Some of the common effects include strobe, flashing, flowing of lights, and color fixing. Despite being a manual control option for your colorful dance floor, the remote control offers more color modes than its counterparts.

• IPad Control Mode

          This is a wireless method of controlling your MK-LD01 3d LED dance floor. It is quite similar to the remote control mode, besides the fact that it has to be connected to a wireless application. The iPad control mode assists with controlling the video display on your colorful LED dance floor. It also controls light color, contrast, brightness, and textures. Apart from the in-built modes, you can also create your custom modes depending on the application used.

          A single row of panels usually shares one control module. These control modules are then connected using USB cords to a device like a computer. Hence, these colorful LED panels join together to access the control module. Within the panels, pressure and sound sensors allow the MK-LD01 3d LED dance floor to change its lighting effects and patterns.

• How much is 1 piece of floor tile？
• Sorry, because the floor tiles need to be equipped with power supplies and an SD controller, we will not sell them individually, they are all based on a certain area.

Shipping

• Since the LED dance floor needs to be customized, the processing time is 5-7 days.
• Overseas warehouse delivery: It usually takes 7-15 days to deliver.
• Shipping from China: Deliveries in the US usually take 35-50 days, and 35-60 days for other regions.
• Regardless of where the shipment is from, we will provide tracking information. Once your order is placed, you don't have to pay extra, and the LED dance floor tiles will be delivered directly.