Description
-
CO2 Confetti Blaster for Stage Effects
Powerful confetti bursts for concerts, festivals, weddings, and medium-to-large indoor and outdoor venues. -
15-18m Long-Range Confetti Blast
Launches large amounts of confetti across wide stage and event spaces. -
DMX & Electronic Control
Switch between DMX control and manual operation for flexible event setups. -
Venturi Whirlwind Effect
The cast-aluminum Venturi structure accelerates airflow for higher and farther confetti projection. -
Up to 20kg Confetti Capacity
Large capacity supports high-volume confetti effects with fewer refills. -
300m² Wide Coverage
Creates wide-area confetti effects for large stages and outdoor events. -
Built-In Flight Case
A durable flight case with wheels makes transport and setup easier.
Technical Parameter
- Specification:
| Specification | Details |
|---|---|
| Voltage | 100-120V 60Hz or 220-240V 50Hz |
| Power | 200W |
| Control Mode | DMX512 / Electronic Control |
| DMX Channel | 1CH |
| Spray Height | 15-18m |
| Maximum Capacity | 20kg |
| Coverage Area | 300m² |
| N.W. / G.W. | 57kg / 65kg |
| Package Size | 75 × 40 × 116cm |
| Product Warranty | 1 year |
| Certification | CE, RoHS, FCC |
Package Included
| Item | Quantity |
|---|---|
| DMX Confetti Blaster | 1 pc |
| 3m High-Pressure Hose | 1 pc |
| DMX Cable | 1 pc |
| Power Cable | 1 pc |
- Please Note
Confetti paper and the CO₂ gas cylinder are not included with the machine. Please prepare them separately before use.
How to Use
Operating Instructions:
-
Install the confetti fan securely and adjust the spray direction as needed.
-
Connect the power cable and DMX cable. The machine supports serial connection.
-
Set the DMX address using the controls on the bottom of the machine.
-
Keep the air inlet clean and unobstructed.
-
Load the desired amount of colored confetti paper into the cannon.
-
Turn on the power and use the DMX controller to operate the machine.
Shipping
- U.S. warehouse: 2-5 working days to U.S., 7-12 working days to other areas.
- Spain warehouse: 2-4 working days to Spain, 7-12 working days to other EU regions.
- Poland warehouse: 2-4 working days to Poland, 7-12 working days to the rest of the EU.
- China warehouse: 7-20 working days for direct shipment from China.
- The transportation type depends on the region and is uniformly displayed as international shipping.
- The goods will be sent out within 1-5 working days. After the logistics order number is generated, customer service will email you. Please pay attention to the delivery status.
- If you have any questions, please leave a message.
Q&A
Q: What kind of activities can the MK-CN05A be used for?
A: The MK-CN05A is designed for medium-to-large indoor and outdoor events, including corporate events, sports events, festivals, concerts, and celebrations.
Q: Can the CO₂ hose be customized to a longer length?
A: Yes. The hose can be customized to a longer length at an additional cost.
Q: How long can the CO₂ hose be?
A: We recommend keeping the hose length within 25m (80ft) when using a 40L CO₂ gas cylinder. Longer hoses or insufficient gas pressure may affect the spray effect.
Q: Can one CO₂ cylinder power multiple confetti blasters?
A: Generally, one CO₂ cylinder is recommended for one confetti blaster. A single cylinder can power up to two machines, depending on the gas pressure and operating conditions.
Q: How far can the MK-CN05A spray confetti?
A: The MK-CN05A can spray confetti approximately 15-18m with sufficient CO₂ gas pressure.
Q: What is the difference between the MK-CN05 and MK-CN05A?
A: Both models use an internal Venturi-based structure to accelerate gas flow and help project confetti higher and farther.
The MK-CN05 is manually operated and does not require a power supply.
The MK-CN05A supports DMX and Electronic Control. DMX control requires a power connection and allows multiple units to be operated together.
Q: How long can one 40L CO₂ gas cylinder power the confetti blaster?
A: A 40L CO₂ gas cylinder can provide approximately 40 seconds of continuous confetti spraying for one machine, depending on operating conditions.
Q: Can a small CO₂ gas cylinder be placed inside the machine?
A: No. The MK-CN05A does not have an internal space for a CO₂ gas cylinder. The gas cylinder should be connected externally using the high-pressure hose.
Q: What is the function of the Venturi structure?
A: The cast-aluminum Venturi structure accelerates the gas flow, helping project confetti higher and farther.
Q: Is the CO₂ gas cylinder included?
A: No. The CO₂ gas cylinder and confetti paper are not included and should be prepared separately.
